Manual Edge Banding Machine Trimmer End Cutting Device Straight Trimming Carpenter Hardware Tool

Manual Edge Banding Machine Trimmer End Cutting Device Straight Trimming Carpenter Hardware Tool
  • Продавецcantinemartinelli.com
  • Список ценUS $30.83piece
  • Продажная ценаUS $30.83piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,7 (972)

Oписание продукта

HTB1724gXyzxK1RkSnaVq6xn9VXaA-1_01-1_02-1_03-1_04-1_05-1_06-1_07HTB1oBFeXvLsK1Rjy0Fbq6xSEXXai

Description of use:
1. Applicable to the telecommunications electrical industry, winding various recorder heads, inductor coils, instrument coils, relay coils, timers, various coils and power transformers in TV sets, radios and various flat coils.
Mechanical principle:
1. Hand-cranked electric counting winding machine is driven by the main shaft of the rocker handle. The main gear and the counter shaft speed ratio are 10:1. When the main shaft is turned to 1, the counter shaft is 1/10. Turn, that is, the number of counter letters is 1 turn.
Instructions:
1. The machine should be placed on a sturdy workbench. The countertop is made of wood. There are 3 holes on the bottom plate for fixed installation between the machine and the workbench.
2. When using, use the left-hand board to move the counter reset handle to 00000.
The counter is required to reset the board twice, so that the counting gears are all in the reset state. (Otherwise, the gear slippage is not accurate), the operation can be started, and the operation can be completed.
specification
1.The maximum diameter:150mm
2.Maximum length of coil: 80mm
3.Digital counting range 0-99999 laps
4.Dimensions:350 mm x 170 mm x 160 mm
5.Net weight:3kg
Packing list:
1*NZ-5 Winding machine
Kindly Note:
1.The picture may be a bit different from the actual color;
2.Manual measurement may be a little error thanks understand.HTB1r9dgXsfrK1RkSnb4q6xHRFXaYHTB1PJmchhTpK1RjSZR0q6zEwXXaqHTB1Tf9ghcfpK1RjSZFOq6y6nFXagHTB139XhXzzuK1RjSsppq6xz0XXaPHTB1TSubhgDqK1RjSZSyq6yxEVXaY